DE
EN
RAVENOL CeramiX-Pro improves the emergency running properties of the engine, ensures smooth running, reduces fuel consumption and contributes significantly to extending engine life.
RAVENOL CeramiX-Pro uses special ceramic particles (hBN) that have been carefully developed and extensively tested to ensure oil filter permeability - even with very fine high-performance filters - and non-clumping properties. This provides optimal support for honing structures, enabling them to perform their function of forming oil reservoirs in the piston running surfaces.
Application note
RAVENOL CeramiX-Pro is compatible with all commercially available mineral and (fully-) synthetic monograde and multigrade engine oils and can be used in vehicles with gasoline and diesel engines with and without turbocharger and catalytic converter. Safe for use in wet-belt-systems (belt runnig in the oil system).
Shake well before use.
Add the contents to the engine oil at operating temperature. Application is recommended every 50,000 km or at every oil change. The content of one can is sufficient for up to 5 liters of engine oil.
Do not use in systems with wet clutches.
Characteristics
- Excellent reduction of friction throughout the engine
- Ceramic-reinforced wear protection for all engine types
- Stable even under extreme temperatures and loads
- Long-term effect - protection over thousands of kilometers
- Compatible with particulate filters, catalytic converters and turbochargers
- Improves engine running, cold start behavior and energy efficiency
- Inhibits oil ageing
- Highly economical due to reduced fuel consumption
- Non-clumping properties
- Does not interfere with honing structure function
Technical data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Aussehen/Farbe | weißlich | VISUELL | |
| Dichte bei 15 °C | kg/m³ | 858 | EN ISO 12185 |
| Flammpunkt (CC) | °C | 246 | DIN EN ISO 2592 |
| Pourpoint | °C | -24 | DIN ISO 3016 |
| Noack Verdampfungstest | % M/M | 6,4 | ASTM D5800 |
| Viskosität bei 100 °C | mm²/s | 12,6 | DIN 51562-1 |
| Viskosität bei 40 °C | mm²/s | 71,5 | DIN 51562-1 |
| Viskositätsindex VI | 177 | DIN ISO 2909 |