DE
EN
RAVENOL VDL SAE 5W-40 is a full synthetic, low-friction engine oil with CleanSynto® Technology for passenger car diesel engines with or without turbo-charging and direct injection.
RAVENOL VDL SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL VDL SAE 5W-40 contributes to protect the environment by reducing the emissions.
RAVENOL VDL SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application note
RAVENOL VDL SAE 5W-40 is ideally suited for energy-saving year-round use in passenger car diesel engines with turbocharger and catalytic converter operation.
RAVENOL VDL SAE 5W-40 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.
Characteristics
- a high corrosion protection
- fuel saving because of smooth running characteristics
- excellent detergent and dispersant characteristics
- prevention of black sludge formulation
- long endurance because of a high oxidation stability
- an excellent cold start behaviour
- a very good viscosity temperature behaviour
- a low evaporation tendency
- suitable for catalysts
Technical data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Aussehen/Farbe | gelbbraun | VISUELL | |
| Sulfatasche | %wt. | 1,39 | DIN 51575 |
| TBN | mg KOH/g | 10,0 | ASTM D2896 |
| Viskosität bei 100 °C | mm²/s | 14,4 | DIN 51562-1 |
| Viskosität bei 40 °C | mm²/s | 87,7 | DIN 51562-1 |
| Viskositätsindex VI | 170 | DIN ISO 2909 | |
| CCS Viskosität bei -30 °C | mPa*s | 4220 | ASTM D5293 |
| Dichte bei 20 °C | kg/m³ | 844,0 | EN ISO 12185 |
| Flammpunkt | °C | 240 | DIN EN ISO 2592 |
| HTHS Viskosität bei 150 °C | mPa*s | 3,8 | ASTM D5481 |
| Low Temp. Pumping viscosity (MRV) bei -35 °C | mPa*s | 18.600 | ASTM D4684 |
| Noack Verdampfungstest | % M/M | 6,9 | ASTM D5800 |
| Pourpoint | °C | -51 | DIN ISO 3016 |