DE
EN
RAVENOL HSW SAE 0W-30 is a synthetic based low friction motor oil with a PAO proportion > 30% andproven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
RAVENOL HSW SAE 0W-30 lengthens the service life of the diesel particulate filter by reducing the concentration of ash-forming particles in the exhaust gas. It reduces the emissions of gases which are harmful to the environment. It delivers a higher degree of security by providing lasting protection for engines.
With its formulation, RAVENOL HSW SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By reducing fuel consumption, RAVENOL HSW SAE 0W-30 helps to protect the environment by reducing emissions. It minimizes friction, wear and fuel consumption.
RAVENOL HSW SAE 0W-30 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.
Extended oil change intervals according to the manufacturer’s instructions.
Application note
RAVENOL HSW SAE 0W-30 can be used in all vehicles with and without LongLife Service and is therefore suitable for extended oil change intervals and vehicles with and without DPF filters. The operating instructions of the vehicle and engine manufacturers must be observed.
Characteristics
- Particularly low-friction characteristics and an outstanding range of benefits thanks to special additives.
- Outstanding engine protection even after a cold start and in tougher conditions.
- Guarantees rapid engine lubrication even at low temperatures of under -30°C and a sufficiently thick film of lubrication even at oil temperatures of >150°C during high-speed journeys.
- Good protection against wear and tear and the high level of engine cleanliness while also consuming less fuel (fuel economy characteristic).
- The hydraulic tappets are guaranteed to function at all temperatures due to adequate oil pressure.
- Does not have an impact on sealants.
- Safeguards the engine against sludge formation, coking, lacquering and corrosion even in unfavourable operating conditions.
Technical data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Aussehen/Farbe | gelbbraun | VISUELL | |
| Sulfatasche | %wt. | 0,7 | DIN 51575 |
| TBN | mg KOH/g | 8,3 | ASTM D2896 |
| Viskosität bei 100 °C | mm²/s | 12,2 | DIN 51562-1 |
| Viskosität bei 40 °C | mm²/s | 62,4 | DIN 51562-1 |
| Viskositätsindex VI | 197 | DIN ISO 2909 | |
| CCS Viskosität bei -35 °C | mPa*s | 5890 | ASTM D5293 |
| Dichte bei 20 °C | kg/m³ | 836,0 | EN ISO 12185 |
| Flammpunkt | °C | 228 | DIN EN ISO 2592 |
| HTHS Viskosität bei 150 °C | mPa*s | 3,7 | ASTM D5481 |
| Low Temp. Pumping viscosity (MRV) bei -40 °C | mPa*s | 19.200 | ASTM D4684 |
| Noack Verdampfungstest | % M/M | 10,0 | ASTM D5800 |
| Pourpoint | °C | -54 | DIN ISO 3016 |