DE
EN
RAVENOL HSV SAE 0W-30 is a synthetic motor oil with proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.
With its new formulation, RAVENOL HSV SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL HSV SAE 0W-30 helps to protect the environment by reducing emissions.
RAVENOL HSV SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Extended oil change intervals according to the manufacturer’s instructions.
Application note
RAVENOL HSV SAE 0W-30 is a universal, fuel-efficient engine oil for gasoline engines in passenger cars. It is suitable for vehicles with and without turbocharging as a synthetic all-season engine oil. Due to the current API SP (RC) specification, additional protection against LSPI (Low Speed Pre Ignition).
Characteristics
- Fuel savings in part and full load range
- Universal application in all modern petrol engines
- Quick lubrication of the engine even at temperatures below -30 °C
- Low evaporation tendency, therefore a lower oil consumption
- Safety against accumulation of sludge, coking and corrosion even under unfavourable operating conditions
- No oil limited deposits in combustion chambers, at the piston ring and valves
- Unchanged viscosity during the whole oil change interval, high viscosity index
- Neutral against sealing materials
- Miscibility with all commercially available engine oils. Flushing is not required
Technical data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Aussehen/Farbe | gelbbraun | VISUELL | |
| Sulfatasche | %wt. | 1,2 | DIN 51575 |
| TBN | mg KOH/g | 8,8 | ASTM D2896 |
| Viskosität bei 100 °C | mm²/s | 10,9 | DIN 51562-1 |
| Viskosität bei 40 °C | mm²/s | 58,4 | DIN 51562-1 |
| Viskositätsindex VI | 182 | DIN ISO 2909 | |
| CCS Viskosität bei -35 °C | mPa*s | 5160 | ASTM D5293 |
| Dichte bei 20 °C | kg/m³ | 840,0 | EN ISO 12185 |
| Flammpunkt | °C | 238 | DIN EN ISO 2592 |
| HTHS Viskosität bei 150 °C | mPa*s | 3,32 | ASTM D5481 |
| Low Temp. Pumping viscosity (MRV) bei -40 °C | mPa*s | 24.900 | ASTM D4684 |
| Noack Verdampfungstest | % M/M | 10,2 | ASTM D5800 |
| Pourpoint | °C | -42 | DIN ISO 3016 |