DE
EN
RAVENOL FO SAE 5W-30 is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
RAVENOL FO SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL FO SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL FO SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application note
RAVENOL FO SAE 5W-30 is suitable as motor oil for fuel-efficient year-round use in modern petrol and diesel engines in passenger cars, station wagon's, vans and similar vehicles from FORD, RENAULT, Toyota, Hyundai, KIA, Mazda, Honda, Nissan und Mitsubishi.
Characteristics
- Fuel economy in part and full power operation.
- Very stable and excellent viscosity behaviour.
- Excellent shear stability.
- Excellent cold starting characteristics.
- A safe lubricant film at high operating temperatures.
- High wear and corrosion protection, high oxidation stability.
- Prevention of sludge formation.
- Excellent detergent- and dispersant characteristics.
- Catalyst cleaning.
Technical data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Aussehen/Farbe | gelbbraun | VISUELL | |
| Sulfatasche | %wt. | 1,3 | DIN 51575 |
| TBN | mg KOH/g | 10,9 | ASTM D2896 |
| Viskosität bei 100 °C | mm²/s | 10,0 | DIN 51562-1 |
| Viskosität bei 40 °C | mm²/s | 56,6 | DIN 51562-1 |
| Viskositätsindex VI | 165 | DIN ISO 2909 | |
| CCS Viskosität bei -30 °C | mPa*s | 4300 | ASTM D5293 |
| Dichte bei 20 °C | kg/m³ | 849,0 | EN ISO 12185 |
| Flammpunkt | °C | 240 | DIN EN ISO 2592 |
| HTHS Viskosität bei 150 °C | mPa*s | 3,08 | ASTM D5481 |
| Low Temp. Pumping viscosity (MRV) bei -35 °C | mPa*s | 14.000 | ASTM D4684 |
| Noack Verdampfungstest | % M/M | 9,4 | ASTM D5800 |
| Pourpoint | °C | -39 | DIN ISO 3016 |